The first hemp fiber built to the HFGA US Textile Standard
Imperium is Heartland India's first producer compliant with the HFGA US Hemp Textile Standard. Carrying a full Digital Product Passport from Carbon Report that traces every lot from farm to yarn to fabric.
In India
The first fiber producer in India compliant with the HFGA US Hemp Textile Standard.
Apparel grade
Blend and cottonized hemp fiber, graded for cotton-system spinning.
Full DPP
A Digital Product Passport on every lot, unbroken from the field to finished textile.
What HFGA-TX-US-01 sets
The HFGA US Hemp Textile Standard is a technical standard from the Hemp Fiber and Grain Association that defines how US-grade industrial hemp bast fiber is graded and documented for textile use: three fiber grades, permitted retting methods, a restricted-substance list, and field-to-bale traceability, with the test methods and sampling that verify all of it.
Fiber grades
Three measured grades, TX-A to TX-C, by fineness, length, strength, and cleanliness.
Retting methods
Field, tank, enzymatic, or steam, declared per lot, chlorine-free.
Restricted substances
PFAS, glyphosate, chlorine, formaldehyde, and heavy metals held to strict limits.
Field-to-bale traceability
An unbroken record and lot ID from the standing crop to the baled fiber.
Three fiber grades
The grades aren't a quality ranking, each is a different fiber for a different spinning process. TX-B is wet-spun long-line; Imperium produces TX-A for cotton-system spinning.
Blend / short line
Fineness 6.1–12.0 dtex · 25–45 mm · tenacity ≥ 35 cN/tex · shive ≤ 3.0%
Typical use, Cotton-system blends, cottonized fiber
Long line
Fineness ≤ 6.0 dtex · 45–120 mm · tenacity ≥ 45 cN/tex · shive ≤ 1.0%
Typical use, Wet-spun long-line yarns, a different process and product
Technical nonwoven
Fineness ≤ 25 dtex · ≥ 15 mm · tenacity ≥ 25 cN/tex · shive ≤ 6.0%
Typical use, Needle-punch felt, composites, insulation
A Digital Product Passport,
farm to fabric
Every conforming lot carries an unbroken record. Five checkpoints, one lot ID, so a finished textile resolves all the way back to the field it grew in.
Farm
USDA-equivalent licence, certified seed lot, parcel geolocation, and a pre-harvest cannabinoid test, logged against every lot before a single stalk is cut.
Retting
Method and degree recorded (field, controlled-tank, enzymatic, or steam) with effluent captured. No chlorinated agents, ever.
Decortication & grading
Line fiber decorticated below 120°C to preserve tenacity, then graded and lab-tested for fineness, length, and strength to Grade TX-A.
Yarn
Spun from graded fiber, with a signed chain-of-custody transfer and a mass balance that reconciles input straw to output fiber within ±3%.
Fabric
Woven or knit with the lot ID intact, so a finished textile resolves all the way back to the field it grew in.
Clean by standard
The restricted-substance list isn't a marketing promise. It's a tested requirement of the standard.
No PFAS
Total organic fluorine under 20 mg/kg, no “forever chemicals.”
No pesticides off-label
Only EPA-labeled inputs; residues within EPA tolerance for hemp.
No glyphosate
Pre-harvest desiccants, glyphosate included, are prohibited outright.
No chlorine bleaching
Peroxide or ozone only. Chlorinated agents disqualify the lot.
Formaldehyde ≤ 16 mg/kg
Free and released formaldehyde held to a strict ceiling.
THC compliant
≤ 0.3% dry weight in feedstock; not detected in delivered fiber.
What compliance means
Under HFGA-TX-US-01, conformity is a property of tested material, not a company badge. Each claim names the standard, its version, the grade, and a specific verified lot, so what you read is exactly what was tested.
Permitted product claim
Imperium Fiber is registered to HFGA-PCP-…, declaring conformity to HFGA-TX-US-01 v1, Grade TX-A, verified lot HFGA-…-2026-…
The claim resolves to a lot and a Lot Verification Record, the same evidence a brand's due-diligence team would audit.
Source hemp fiber you can actually trace
Grade TX-A fiber, HFGA-compliant, with a Digital Product Passport on every lot. Talk to us about supply for your brand.
From the Journal
All articles →
Anti-Odor Finishes, Skin Microbiome, and Synthetic Activewear
Anti-odor activewear often relies on antimicrobial finishes. Here is what the textile and microbiome literature is asking, and how fiber choice changes the odor problem without personal health promises.
Antimony in Polyester: Catalyst Residues and Skin-Contact Apparel
Polyester production often uses antimony catalysts. Here is what residual antimony means for skin-contact apparel, what migration studies ask, and why fiber choice changes the inventory.
Polyester Bedding and Overnight Skin Contact
Bedding sits against skin for hours every night. Here is what prolonged polyester contact means for exposure pathways, wrinkle resins, and microfiber in the bedroom, without turning sleep into a diagnosis.